Topic: nanobots

[Guest]

Finished it.  Good game.

@piperhcombs:

Thanks for the tip.  Actually, even if you have all the test tubes filled it's not a dead end because you can have one of the other bots pick up a filled tube to have it explode and get replaced with an empty one.

[piperhcombs]

Finished it.  Good game.

@piperhcombs:

Thanks for the tip.  Actually, even if you have all the test tubes filled it's not a dead end because you can have one of the other bots pick up a filled tube to have it explode and get replaced with an empty one.

That is true. probably should've realized that since I had tallbot pick up one before I started the acid recipe.

[shadyhtown]

Got it.. thanks

[maggie]

Still struggling with gumball. How do I get it to roll in the hole I made with acid?

[Guest]

Still struggling with gumball. How do I get it to roll in the hole I made with acid?

Have you tried moving around the objects on the counter?

[Khris]

Yeah, thanks piperhcombs, I'm through.
Odd:

When mixing the first recipe, it didn't occur to me that 1 blue and 1 red already result in 2 purple. The thing is I poured 2 red and 2 blue in there and it still worked.
However, the second recipe is supposed to contain 2 green, but this time, using 2 yellow and 2 blue _doesn't_ work.

[Vince On Vacation]

Hey guys, yup, there are two pretty significant but not gamestopping bugs left in there relating to the creation of the acid.

When you do the first boil, no matter how much purple you have in there, (2, 4, zero!!) it always results in the right amount, so that when you add the yellow and boil, it will create the acid.  I know exactly what I did wrong, even though I don't have access to my code right now.  D'oh! 

Thanks to everybody who has pointed this out.  It's the first bug that's slipped past one of my releases!   

[dfordead]

I am not able to find the recipe for Acid, where do I find? Thanks.

[piperhcombs]

@dfordead: Take a look at the books....

[Guest]

Ok, I'm stuck now! I've got up to the glitter...but how do I get down?

[Khris]

Guest:

There's a bot who can talk to anybody.

[piperhcombs]

@Guest:

cont'd from KhrisMUC if you need further guidance:

he could even talk to animals.

[dfordead]

Is it the order of the books or should I use brain bot to read one. I am stuck here like for ever please help.

@dfordead: Take a look at the books....

[Khris]

dfordead:

Use Strongbot to push the books. Then use Brainbot to read the chemistry book.

[Vince on Vacation]

dfordead:

Actually, you don't need to push the books first, as Khris suggested, but you do need to hear about the acid before brainbot will be able to find it in the chemistry book.

To do that:

I there someone you could call?

[dfordead]

i tried that, my brainbot just says that:

it needs hours to analyze the book, and a better plan is needed... It doesn't reveal the recipe.

Use Strongbot to push the books. Then use Brainbot to read the chemistry book.

dfordead:

Use Strongbot to push the books. Then use Brainbot to read the chemistry book.

[piperhcombs]

@dfordead:

Take Vince's advice.

Call someone. Who? What other person do you see on the desk?


Take a good look at that picture.



Don't know how to talk to her? Which robot is the best candidate for talking?

[dfordead]

Ok that worked. How do I

lift the balloon of the table? I guess I am almost there.

[piperhcombs]

@dfordead:

you'll need to use the acid you made first. You're not getting up on that high shelf from the other one.

Have you revealed the message on the postcard yet?

[dfordead]

Hi, I think I was not clear.

Actually I got the ballon off the shelf, I followed the second recipe as well, now I have tied the balloon to the chain as well. All that is left is take off. I switched on the fan and placed the mug in front off it.

No luck.