FloatToInt
IntToFloat
ArcCos
ArcSin
ArcTan
ArcTan2
Cos
Cosh
DegreesToRadians
Exp
Log
Log10
RadiansToDegrees
RaiseToPower
Sin
Sinh
Sqrt
Tan
Tanh
Pi property
int FloatToInt(float value, optional RoundDirection)Converts the supplied floating point value into an integer.
This function is necessary because implicit conversions in the script are not supported.
RoundDirection can be either eRoundDown (the default), eRoundUp or eRoundNearest, which specifies what direction to round the floating point number in.
Example:
Display("Round down: %d", FloatToInt(10.7)); Display("Round up: %d", FloatToInt(10.7, eRoundUp)); Display("Round nearest: %d", FloatToInt(10.7, eRoundNearest));displays the integer value of 10.7, rounded in the three different ways.
See Also: IntToFloat
float IntToFloat(int value)Converts the supplied integer value into a floating point number.
This function is necessary because implicit conversions in the script are not supported.
Example:
float number = IntToFloat(10);loads 10.0 into the variable number.
See Also: FloatToInt
float Maths.ArcCos(float value)Calculates the arc-cosine, in radians, of the specified value.
To convert an angle in radians to degrees, use Maths.RadiansToDegrees.
Example:
float angle = Maths.ArcCos(1.0);calculates the arc-cosine of 1.0 and places it into variable angle.
See Also: Maths.Cos, Maths.DegreesToRadians,
float Maths.ArcSin(float value)Calculates the arc-sine, in radians, of the specified value.
To convert an angle in radians to degrees, use Maths.RadiansToDegrees.
Example:
float angle = Maths.ArcSin(0.5);calculates the arc-sine of 0.5 and places it into variable angle.
See Also: Maths.Sin, Maths.DegreesToRadians,
float Maths.ArcTan(float value)Calculates the arc-tan, in radians, of the specified value.
To convert an angle in radians to degrees, use Maths.RadiansToDegrees.
Example:
float angle = Maths.ArcTan(0.5);calculates the arc-tan of 0.5 and places it into variable angle.
See Also: Maths.ArcTan2, Maths.DegreesToRadians, Maths.Tan
float Maths.ArcTan2(float y, float x)Calculates the arctangent of y/x. This is well defined for every point other than the origin, even if x equals 0 and y does not equal 0. The result is returned in radians.
To convert an angle in radians to degrees, use Maths.RadiansToDegrees.
Example:
float angle = Maths.ArcTan2(-862.42, 78.5149);calculates the arc-tan of -862.42 / 78.5149 and places it into variable angle.
See Also: Maths.DegreesToRadians, Maths.ArcTan
float Maths.Cos(float radians)Calculates the cosine of the specified angle (in radians).
To convert an angle in degrees to radians, use Maths.DegreesToRadians.
Example:
float cosine = Maths.Cos(Maths.DegreesToRadians(360.0));calculates the cosine of 360 degrees (which is 1.0) and places it into variable cosine.
See Also: Maths.ArcCos, Maths.Cosh, Maths.DegreesToRadians, Maths.Sin, Maths.Tan
float Maths.Cosh(float radians)Calculates the hyperbolic cosine of the specified angle (in radians).
To convert an angle in degrees to radians, use Maths.DegreesToRadians.
Example:
float hcos = Maths.Cosh(Maths.DegreesToRadians(360.0));calculates the hyperbolic cosine of 360 degrees and places it into variable hcos.
Compatibility: Supported by AGS 3.2.0 and later versions.
See Also: Maths.Cos, Maths.DegreesToRadians, Maths.Sinh, Maths.Tanh
float Maths.DegreesToRadians(float degrees)Converts the supplied angle in degrees, to the equivalent angle in radians.
Since the trigonometric functions such as Sin, Cos and Tan work in radians, this function is handy if you know the angle you want in degrees.
Example:
float cosine = Maths.Cos(Maths.DegreesToRadians(360.0));calculates the cosine of 360 degrees (which is 1.0) and places it into variable cosine.
See Also: Maths.Cos, Maths.RadiansToDegrees, Maths.Sin, Maths.Tan
float Maths.Exp(float x)Returns the exponential value of the floating-point parameter, x
The result is e to the power x, where e is the base of the natural logarithm. On overflow, the function returns infinite and on underflow, returns 0.
Example:
float expValue = Maths.Exp(2.302585093);calculates Exp of 2.302585093 (which should be 10) and places it into the variable.
Compatibility: Supported by AGS 3.2.0 and later versions.
See Also: Maths.Log, Maths.Log10
float Maths.Log(float x)Returns the natural logarithm (base e) of x.
x must be a positive non-zero number.
Example:
float logVal = Maths.Log(9000.0);calculates Log of 9000 (which should be 9.104980) and places it into the variable.
Compatibility: Supported by AGS 3.2.0 and later versions.
See Also: Maths.Exp, Maths.Log10
float Maths.Log10(float x)Returns the base-10 logarithm of x.
x must be a positive non-zero number.
Example:
float logVal = Maths.Log(9000.0);calculates Log10 of 9000 (which should be 3.954243) and places it into the variable.
Compatibility: Supported by AGS 3.2.0 and later versions.
See Also: Maths.Exp, Maths.Log
float Maths.RadiansToDegrees(float radians)Converts the supplied angle in radians, to the equivalent angle in degrees.
Since the trigonometic functions such as Sin, Cos and Tan work in radians, this function is handy to convert the results of one of those functions back to degrees.
Example:
float halfCircle = Maths.RadiansToDegrees(Maths.Pi);converts PI radians into degrees (which is 180).
See Also: Maths.Cos, Maths.DegreesToRadians, Maths.Sin, Maths.Tan
float Maths.RaiseToPower(float base, float exponent)Calculates the value of base raised to the power exponent.
This means that base is multiplied by itself exponent times.
Example:
float value = Maths.RaiseToPower(4.0, 3.0);calculates 4 to the power 3 (which is 64).
See Also: Maths.Sqrt
float Maths.Sin(float radians)Calculates the sine of the specified angle (in radians).
To convert an angle in degrees to radians, use Maths.DegreesToRadians.
Example:
float sine = Maths.Sin(Maths.DegreesToRadians(360.0));calculates the sine of 360 degrees (which is 0) and places it into variable sine.
See Also: Maths.ArcSin, Maths.Sinh, Maths.DegreesToRadians, Maths.Cos, Maths.Tan
float Maths.Sinh(float radians)Calculates the hyperbolic sine of the specified angle (in radians).
To convert an angle in degrees to radians, use Maths.DegreesToRadians.
Example:
float hsine = Maths.Sinh(Maths.DegreesToRadians(360.0));calculates the hyperbolic sine of 360 degrees and places it into variable hsine.
Compatibility: Supported by AGS 3.2.0 and later versions.
See Also: Maths.ArcSin, Maths.Sin, Maths.DegreesToRadians, Maths.Cosh, Maths.Tanh
float Maths.Sqrt(float value)Calculates the square root of the supplied value.
The square root is the number which, when multiplied by itself, equals value.
Example:
Display("The square root of 4 is %d!", FloatToInt(Maths.Sqrt(4.0)));displays the square root of 4 (rounded down to the nearest integer).
See Also: Maths.Cos, Maths.RaiseToPower, Maths.Sin, Maths.Tan
float Maths.Tan(float radians)Calculates the tangent of the specified angle (in radians).
To convert an angle in degrees to radians, use Maths.DegreesToRadians.
Example:
float tan = Maths.Tan(Maths.DegreesToRadians(45.0));calculates the tan of 45 degrees (which is 1.0) and places it into variable tan.
See Also: Maths.ArcTan, Maths.Tanh, Maths.DegreesToRadians, Maths.Cos, Maths.Sin
float Maths.Tanh(float radians)Calculates the hyperbolic tangent of the specified angle (in radians).
To convert an angle in degrees to radians, use Maths.DegreesToRadians.
Example:
float htan = Maths.Tanh(Maths.DegreesToRadians(45.0));calculates the hyperbolic tan of 45 degrees and places it into variable htan.
Compatibility: Supported by AGS 3.2.0 and later versions.
See Also: Maths.ArcTan, Maths.Tan, Maths.DegreesToRadians, Maths.Cos, Maths.Sin
readonly float Maths.PiGets the value of Pi (defined as 3.14159265358979323846).
Example:
Display("Pi is %f!", Maths.Pi);displays the value of Pi.
See Also: Maths.Cos, Maths.Sin, Maths.Tan
Converted from CHM to HTML with chm2web Standard 2.85 (unicode) |