I'm having trouble with my text-parser...
It works fine as long as everything is according to my "dictionary" If I type something that isn't in my parser-list it says "I don't understand 'doro' ", just like it should. After that it doesn't understand anything I say, it just goes "I don't understand ' ' ", just like it shouldn't. This could cause some serious problems for the player, you see. Here is some code I though might help:
if (interface == 0) { //parser
if (button == 0)
{string forparser,unknownbuffer;
StrCopy(forparser,"");
GetTextBoxText(0,0,forparser);
SetTextBoxText (0,0, "");
InterfaceOff(0);
if (StrComp(forparser,""))
{ParseText(forparser);
if (SaidUnknownWord(unknownbuffer))
if (rand==0) {
Display ("I don't understand the word '%s'.",unknownbuffer);
rand=1; return;
}
if (rand==1) {
Display ("Could you rephrase the word '%s'?",unknownbuffer);
rand=2; return;
}
if (rand==2) {
Display ("%s is greek to me!", unknownbuffer);
rand=0; return;
}
}
}
}
}
Secondly I get a "two room changes requested within one script" error for this: (error line in bold)
if (gotnum==1) {
DisplaySpeech (ALL, "I don't think this is the right place...");
DisplaySpeechBackground (ALL, "I think I'll look around the street corner here...");
MoveCharacterBlocking (ALL, 270, 117, 1);
ChangeCharacterView (ALL, 8);
SetPlayerCharacter (KEV);
}
}
}They're both solved!
And lastly does anyone have any tips for synchronising talking frames to the text being said? (tutorials, which letters should be grouped...etc.)[/u][/i]
Anything anyone contributes is already greatly appreciated!
EDIT: Oh yes, is there any function for disabling and enabling walkbehinds?
EDITEDIT: Why oh why does it not preserve my indentation? oh well...Done too!
Quote from: Zor© on Wed 28/04/2004 14:09:46
And lastly does anyone have any tips for synchronising talking frames to the text being said? (tutorials, which letters should be grouped...etc.)
Just checking that you knwo that lipsync is for Sierra-style speech only
Quote
EDIT: Oh yes, is there any function for disabling and enabling walkbehinds?
SetWalkbehindBaseline... if you set the baseline to 0, everything will be in front of it.
Quote
EDITEDIT: Why oh why does it not preserve my indentation? oh well...
use [ pre ] ...code... [ / pre ], which CJ should really add to the yabbse help page
I'm afraid I know nothing about the parser stuff, though :-\
Yep, thank you very much. I have been using Sierra-style speech.
Changed it to [ pre ]
And thanks for the walkbehind tip!
QuoteIf I type something that isn't in my parser-list it says "I don't understand 'doro' ", just like it should. After that it doesn't understand anything I say, it just goes "I don't understand ' ' ", just like it shouldn't.
if (SaidUnknownWord(unknownbuffer))
{ <-check that brace
QuoteSecondly I get a "two room changes requested within one script" error for this: (error line in bold)
Is KEV in another room? Could you post the rest of script code within the function?
KEV is in room 3. KEV is the main character, ALL is the cop and SCO is the cop scooter.
if (Said("look window")) {
MoveCharacterBlocking (KEV, 294, 161, 1); //move to window
AnimateCharacter (KEV, 4, 0, 1); //kev crouchs
DisplaySpeech (KEV, "Oh s**t! The cops are here already!");
SetPlayerCharacter (SCO);
NewRoomEx (4, 313, 156); //sends the scooter to outside room
}
}in room 4:
// script for room: Player enters screen (after fadein)
if (GetPlayerCharacter()==SCO) {
MoveCharacterBlocking (SCO, 224, 182, 1);
Wait (40);
ChangeCharacterView (SCO, SCOOTER);
SetPlayerCharacter (ALL);
ChangeCharacterView (ALL, ALLAN);
NewRoomEx (4, 214, 152);
MoveCharacterBlocking (ALL, 136, 152, 1);
Wait (40);
SetBackgroundFrame (1);
if (gotnum==0) {
ObjectOff (0);
}
SetCharacterView (ALL, BLANK);
SetCharacterView (SCO, BLANK);
WaitMouseKey (500);
SetBackgroundFrame (0);
if (gotnum==0) {
ObjectOn (0);
}
ReleaseCharacterView (SCO);
ReleaseCharacterView (ALL);
Wait (40);
if (gotnum==1) {
DisplaySpeech (ALL, "I don't think this is the right place...");
DisplaySpeechBackground (ALL, "I think I'll look around the street corner here...");
MoveCharacterBlocking (ALL, 270, 117, 1);
ChangeCharacterView (ALL, 8);
SetPlayerCharacter (KEV);
}
else if (gotnum==0) {
DisplaySpeech (ALL, "Ah ha! You're going down, baby!");
ObjectOn (1);
WaitMouseKey (500);
ObjectOff (1);
MoveCharacterBlocking (ALL, 125, 142, 1);
ChangeCharacterView (ALL, BLANK);
Wait (80);
}
}
}
Oh, and thanks, now the parser totally works!
SetPlayerCharacter(KEV) would change the room but the problem is that you already requested a room change with the NewRoomEx (4, 214, 152); line. Keep in mind the room isn't changed instantly. Instead the engine finishes running current script (player enters screen) first. A solution would be to remove NewRoomEx (4, 214, 152); line at all.
That newroomex isn't the problem...it's by the bold word.
The NewRoomEx works just fine...you see the player is already in room 4 so he just gets sent to new co-ords...
Just try replacing NewRoomEx (4, 214, 152); with
character[GetPlayerCharacter()].x = 214;
character[GetPlayerCharacter()].y = 152;
That's because you still call NewRoom() two times! 1st - NewRoomEx (4, 214, 152); and the 2nd one indirectly by setting player character who is in a different room - SetPlayerCharacter (KEV).
Right, so it worked...wierd. But thanks!!!
No problem ;)
Just to make it clear - AGS doesn't allow two or more NewRoom() commands going withing the same script sequence, like:
function room_*() {
NewRoom(...);
NewRoom(...);
}
You had:
function room_*() {
NewRoom(...);
SetPlayerCharacter(KEV);
}
but since SetPlayerCharacter(KEV); requires the room to be changed it calls NewRoom() by itself and you have it like there two NewRoom commands present:
NewRoom(...);
SetPlayerCharacter(KEV); --> calls NewRoom(<KEV's room>);
...and that's not allowed.
~Cheers