My problem is I have a npc is mopping up blood and once he is given an inventory item to blood which i made an object starts it animation which like 6 frames of it disapearing then the npc is to move somewhere else in the room. The problem I am having is the npc moves as soon as the animation starts so it appears the bood is being cleaned up by no ne until it is gone. The npc's idle animation is mopping so if he could just stay put until the blood is finished its animation all would be great. If anyone can help it would be greatly appreciated.
I think you have in script player.Walk (x,y,eBlock)
replace it by player.Walk (x,y,eNoBlock) .
Thanks for the reply Mirek but I still have the same problem. Is there maybe better way I can animate this, I feel like I have maybe taken the lazy way out but I dont know. Maybe not.
Ok, what you want is to run the blood animation on blocking, which means the rest of the script will wait until the animation has finished before running. I don't know what setup you have, but something like this should do it:
oBlood.SetView(view); //assign the view you used to animate the blood to the object
oBlood.Animate(loop, delay, eOnce, eBlock, eForwards); //animate the blood being removed
//important parameter here is eBlock which halts the script until the animation is finished
cNPC.Walk(x, y, eBlock); //continue the script
Look up the functions in the manual if you need more information about what each parameter does.
Thanks for the help Onedollar but now I get an error message that says my oBlood is undefined even though that is what it is labeled as for script name. ???
2.72: scriptname: BLOOD
3.0: scriptname: oBlood
Thank you KhrisMUC but it still says it is an undefined token.
BLOOD.SetView(20);
BLOOD.Animate(0, 40, eOnce, eBlock, eForwards);
cJasper.Walk(35, 135, eBlock);
Actually Khris, even in AGS 2.72 it would still have been oBlood in the room script.
Objects are only available to the room they are in, so if you are putting this code in your global script it won't work. You must put it in your room script.
Thanks for the reply monkey but now I get a Parse error unexpected 'if' message. ???
// room script file
#sectionstart room_a // DO NOT EDIT OR REMOVE THIS LINE
function room_a() {
// script for Room: Player enters room (after fadein)
cJasper.Animate(cJasper.Loop, 17, eRepeat, eNoBlock);
cNancy.Animate(cNancy.Loop, 22, eRepeat, eNoBlock);
cBigworm.Animate(cBigworm.Loop, 13, eRepeat, eNoBlock);}
if (player.ActiveInventory == inventory[6]) {oBlood.SetView(20);
oBlood.Animate(0, 40, eOnce, eBlock, eForwards);
cJasper.Walk(35, 135, eBlock);}}
#sectionend room_a // DO NOT EDIT OR REMOVE THIS LINE
You have an extra brace at the end of this line.
cBigworm.Animate(cBigworm.Loop, 13, eRepeat, eNoBlock);}
Thanks VK Dan I am an idiot. But now the npc stays in place but the object never starts its animation. >:(
That's because you're running the if function in the 'player enters room' script, so when your player enters the room it checks to see if their active inventory is item 6 then runs the blood animation bit if it is. What you want to do is move that if function into something like player uses inventory on character.
Thanks OneDollar but the problem I was having befoe with that is that the game does not recognize oBLOOD when out of the roomscript.
Ah, yeah, sorry. Ok, the way around this is to use the function CallRoomScript(). In your global script replace your animation functions with CallRoomScript(1); as below:
function cJasper_UseInv()
{
if (player.ActiveInventory == inventory[6]) {
CallRoomScript(1);
cJasper.Walk(35, 135, eBlock);
}
}
Then in your room script make a new function as follows:
function on_call (int value) {
if (value == 1) {
oBlood.SetView(20);
oBlood.Animate(0, 40, eOnce, eBlock, eForwards);
}
}
Dude I'm sorry its still not working I have no idea what to do. Thanks for trying man. If you have any other ideas I'll try anything.
That's alright. How exactly is it not working? What version of AGS are you using?
Edit: Just a thought, but how about replacing the inventory[6] bit with the script name of your inventory like iCloth or something?
Another Edit: I've had a go at building this myself and I've got it working. One other problem is that the CallRoomScript() function runs after the cJasper_UseInv() finishes, so they way I wrote it will cause Jasper to walk before the blood animates. You can fix this by putting the cJasper.Walk line into the on_call function. If you need to do anything more global than just moving a character after the animation, the CallRoomScript sets a game variable called game.roomscript_finished to 1 when it's finished running, so you can put a check for that in your global repeatedly_execute function.
The problem i am having now is that the blood does not run its animation so Jasper is waiting for it to change views so he can move but nothing is happening so he continues idle animation and the blood stays the same. Thanks a lot for trying to help me OneDollar I might just find another way around this but I havent figured out better avenue to take in the animation process. I know I am going to run into similar problems in the future I just wish I knew how to fix this one.
You need to understand how things work before messing about.
This:
oBlood.Animate(0, 40, eOnce, eBlock, eForwards);
Runs the blood animation once, only once and stops all other game logic to do so. This means that you absolutely cannot have your guy doing anything while this is happening. Move away from eBlock if you want multiple events to occur at once.
You're also giving people almost no information to work with in order to help you.
Question 1:
Why exactly is the blood animating anyway? If it's just on the floor to be mopped up, why does it need to animate? If you have a static animation of the blood pool REDUCING IN SIZE as it is mopped, a blocked animation is not the way to go at all, and we need to know these things.
Here's an example.
If Jasper's mopping view is JASPERMOP, and if the blood is part of view BLOODPOOL and has 6 frames (frame 0 having a large pool and frame 6 being no blood left), this is how you could reasonably show it being mopped up:
oBlood.SetView(BLOODPOOL);
cJasper.LockView(JASPERMOP); //special animations (non -walk, -talk, -idle) must be
//locked before playback (or set with ChangeView)
cJasper.Animate(0, 5, eRepeat, eNoBlock); //loop 0 has the mop animation in this ex
oBlood.Animate(0, 20, eOnce, eNoBlock); //loop 0 has the blood animation in this ex
//these are now animating at the same time, but we need to make
//AGS wait until we're done
Wait(500); //adjust the value inside Wait() until the blood is all gone
cJasper.UnlockView(); //ALWAYS unlock locked animations after you are done
//continue on with the game
This is how I would deal with a scene that required multiple things happening at once (but without player involvement). If you need the player to take out the mop, that is handled before this section of code (and is what triggers it). Also, you will notice that he is mopping much faster (delay 5) than the blood is disappearing, which is good. You might need to adjust these values if you want the result to happen faster or slower along with adjusting Wait() to make sure the blood animation completes.
If I understood your post correctly, this should do what you want it to do provided that cJasper is standing over oBlood.
Thanks for the reply ProgzMax before I try it ill explain more like I shuld have to begin with. Jasper is mopping on a constant looping animation as sooon as the player enters the room
cJasper.Animate(cJasper.Loop, 17, eRepeat, eNoBlock);
he is constantly over the blod mopping wthout it decreasing but when the player gives an item to Jasper the blood is then supposed to decrease untill gone hich allows Jasper to move elsewhere. Sorry I thought with ll the replys that people understood the situation.
ProgZ, as long as you run the non-blocking animation
before the blocking one, won't they both play? This would mean you could set the blood animation to blocking and get rid of the wait.
oBlood.SetView(BLOODPOOL);
cJasper.LockView(JASPERMOP);
cJasper.Animate(0, 5, eRepeat, eNoBlock);
oBlood.Animate(0, 20, eOnce, eBlock);
cJasper.UnlockView();
//continue
That's how I understand it anyway. But you know, whatever works.
By the way, this is
all the relevant code I have in my mock up, and as far as I understand what you're trying to do, it works fine (AGS 3.0)...
//In the global script
function cJasper_UseInv()
{
if(player.ActiveInventory==iKey){ //when the correct item is used, call the room script
CallRoomScript(1);
}
}
//in the room script
function on_call (int value){
if (value==1){
oBlood.SetView(2); //set blood to the disappearing view
cJasper.LockView(1); //lock Jasper's view to mopping
cJasper.Animate(0, 3, eRepeat, eNoBlock, eForwards); //animate mopping
oBlood.Animate(0, 5, eOnce, eBlock, eForwards); //animate disappearing
cJasper.UnlockView();
cJasper.Walk(35, 135, eBlock, eWalkableAreas); //move after the disappearing has finished
}
}
function room_AfterFadeIn()
{
cJasper.Animate(2, 3, eRepeat, eNoBlock, eForwards); //start mopping after fade-in
}
Obviously it depends on what your items are called and what views your animations are on, but that's the gist of it. ProgZmax's solution is just an extension of the on_call room script using with locking views, but I didn't go that far in my test. I'm wondering if any problems you have are the result of trying to combine several different methods...
Quote
...so Jasper is waiting for it to change views...
...my method doesn't use anything to do with waiting for the correct view, or other suggestions people have put forward, its completely stand alone.
Thanks for stickin with me ONeDollar and rying to help but the problem tht arises now is tht Jsper does not perform his animation at all. Not when you begin in the room or when he is given the item. This is what I have
function on_call (int value){
if (value==1){
oBlood.SetView(20);
cJasper.LockView(5);
cJasper.Animate(0, 17, eRepeat, eNoBlock, eForwards);
oBlood.Animate(1, 5, eOnce, eBlock, eForwards);
cJasper.UnlockView();
cJasper.Walk(35, 135, eBlock, eWalkableAreas);
}
}
function room_AfterFadeIn()
{
cJasper.Animate(5, 17, eRepeat, eNoBlock, eForwards); //start mopping after fade-in
}
Hmm... ok...
1) What version of AGS are you using?
2) When you setup the room_AfterFadeIn and cJasper_UseInv() functions, you're not just typing them into the script, are you? You have been using the room events and character events to set them up first, right?
3) Watch the difference between views and loops. In the on_call function you're animating Jasper with view 5 and loop 0, but in the room_afterFadeIn function you're animating him with loop 5 of whatever his current view is.
4) I'm starting to run out of ideas, anyone else got any? :)
1. 2.73
2. Yes sir
3. didnt change anything but you were right it should have been 0
4. Thanks for helpin man but this is too discouraging Im just gonna change the game to avoid the problem
womp womp
Hmm, that's a shame. There must be something different with version 2.73 then. Sorry we couldn't sort it for you, I know it works in AGS 3.0 and I'm fairly sure it can be done in 2.73. Maybe you could come back to it later or something. Ah well, you could always make a new animation for Jasper where the blood being removed is included and just remove the object then play that ;D
My only question would be where he got a copy of AGS 2.73 at...Chris never officially released that version. He conclusively determined that it was built upon a foundation of pure evil and if it ever escaped it would destroy the Earth. Oh well.
(end sarcasm)
I presume you meant AGS 2.72? In that case you would simply need to move the relevant code into the appropriate event handlers. The manual should help you getting it set up...sorry to cut this post so short, but I must be going now. Best of luck.
Ha yea I have my connections but seriously thanks for helping guys.