Adventure Game Studio

AGS Games => Hints & Tips => Topic started by: Bluke4x4 on Tue 21/02/2006 02:43:36

Title: 1213 ep 3
Post by: Bluke4x4 on Tue 21/02/2006 02:43:36
Okay, I'm completely stuck. I'm on the train, what does the switch do, and what am I supposed to do? I've been going back and forth for a while, is there something I have to pick up or something?
Title: Re: 1213 ep 3
Post by: DoorKnobHandle on Tue 21/02/2006 09:20:22
Spoiler

You need to go to the front of the train.

If you just entered the train, then just look for a second exit.

Look above yourself.
[close]
Title: Re: 1213 ep 3
Post by: Bluke4x4 on Tue 21/02/2006 12:50:38
No no... I figured that out. That's why I was asking about the switch...
Title: Re: 1213 ep 3
Post by: DoorKnobHandle on Wed 22/02/2006 13:24:16
Spoiler

You already went on top of the train and came to the very front of it? It should stop once you are there and then you can leave it again... The switch opens a door inside that you need to pass to come to the very front of it!
[close]
Title: Re: 1213 ep 3
Post by: on Wed 22/02/2006 19:20:20
I'm in the reactor room. Any help as to how survive the thing with the blinky lights AND the security droid? It gets just too hard, especially after the fourth "zap"!!
Please help
Tinkerer
Title: Re: 1213 ep 3
Post by: DoorKnobHandle on Wed 22/02/2006 19:23:25
Tinkerer

Spoiler

Well, I guess it's just practice. I can't make out a special trick for it. Hang on one of the ledges and only press up or down if you need to and save & load often. It's possible, really!
[close]
Title: Re: 1213 ep 3
Post by: Bluke4x4 on Wed 22/02/2006 20:21:42
No no, I figured out everything, I think

Spoiler
Go up to the second ledge and flip the triangle switch.. one of the circles should have a little electrical thing. then go to the top one and flip the switch, now the whole circle should light up... then go all the way to the floor and flip the switch when the robot is in front of the circle. repeat a lot. look out, robots come in from the side.
[close]

I think you may have already figured that out... but, oh well...